6 Brilliant DIY Headphone Hanger Ideas You Should Try!

6 Brilliant DIY Headphone Hanger Ideas You Should Try!

Stands and hangers are essential for organizing your headphones. But instead of buying one, why not try creating a DIY headphone hanger instead? Read on and explore all our design ideas.

It is always a good thing to keep your workstation organized. It keeps your table free from unnecessary clutter. At the same time, it prevents your stuff from being lost and damaged.

One way of achieving these things is by crafting a DIY headphone hanger. Headphones, after all, can take up a lot of table space. Their wires or cables can be tangled easily, as well.

Below are some of the brilliant DIY headphone rack tutorials that you can follow. Instead of buying a headphone mount, you should just consider creating one. It saves you money from buying mobile accessories, and it lets you utilize unused materials in your home, as well.

Table Of Contents

  1. How to Make a Headphone Hanger
  2. Headphone Stand Design
  3. Cool Headphones Stand
  4. DIY Headphone Wall Mount
  5. Homemade Headphone Hanger
  6. Under Desk Headphone Hanger DIY
    • Tips to Make a Headset Hanger
    • Lamicall Headphone Hangers and Stands
    • Lamicall Under Desk Headphone Hanger DH01
    • Lamicall Headphone Hook Desk DH03
    • Lamicall Headset Stand for Desk H1

1. How to Make a Headphone Hanger

A DIY aluminum headphone hanger

Image Source: Instructables

Let’s begin with a simple yet cool DIY headphone hanger that you affix to the wall. This design allows you to free up space in your workstation. 

What you need here are the following: pliers, drilling machine, metal driller, aluminum pipe, screwdriver, vice, and ruler. You no longer have to spend on anything if you have these materials and equipment in your home.

  1. Start by shaping the aluminum metal with the use of the pliers. 
  2. Next, have the drilling machine create holes. 
  3. Once done, mount the aluminum metal and lock it via screws. 
  4. You can also cover the hanger with duct tape so that your headphone will be protected from scratches. It also looks cool!

2. Headphone Stand Design

A wooden but elegant headphone stand

Image Source: Instructables

A headphone stand is also a good idea for a DIY hanger. It is simple to create, and you can assemble one within just a short period. Plus, it enables you to practice your craft.

What you need here is the following: sandpaper, wood, handsaw, pencil, ruler, glue, paint, clamps, hammer, and nails. If you have these materials already, then you don’t need to spend on anything.

  1. The first thing that you need to do is to create a sturdy base for the headphone stand through the use of wood. You may want to cut the wood in the size of 3 inches x 3 inches so that it can support the weight of the headphone without being too bulky. 
  2. After cutting the wood, sand the sides where you made the cut. Paint the base with any color that you want. 
  3. Next, you can start making the top of the headphone stand. There are different styles to choose from. However, we recommend that you follow our setup here. Our design will prevent the headphone from rubbing against the wood. 
  4. The first thing that you need to do is to measure the length of your headphones. Once you get the measurements, add another inch to that. It will serve as the pole. Mark it using your pencil and draw straight lines for cutting. After you are finished with cutting, sand and paint the top.
  5. Combine the pieces that you made through the use of a hot glue gun. Make sure that you apply sufficient pressure while combining the parts. In this way, the connection would be tight enough.

3. Cool Headphones Stand

A reclaimed walnut wood used as headphone stand

Image Source: YouTube

This one is an interesting design for a headphone stand. Specifically, this one will require you to exercise your woodworking skills. At the same time, it will enable you to utilize any unused timber in your area. 

Aside from wood, this project will require you the following materials: table saw, power drill, hand file, screwdriver, table saw, band saw, and jointer.

  1. The first thing that you need to do is to match the headphone’s shape to the wood. 
  2. Next, cut the shape of your sketch, make work of the bottom piece and construct the bottom and top sections. You can make the finishing touches after this. 
  3. If you have the time, you can etch the wood with personalized designs. 
  4. Feel free to create a compartment where you store the cable of your headphones.

4. DIY Headphone Wall Mount

Bicycle hooks used as a simple DIY wall mount

Image Source: Instructables

In this DIY project, we will be showcasing how you can utilize bicycle hooks as wall mounts for headphones. These hooks are great materials because they don’t deteriorate.

For this task, you would need at least two bicycle hooks. You also need a pencil, drilling machine with drill bits, hacksaw, ruler, screwdriver, and screws.

  1. This project is easy to do. It is not time-consuming, allowing you to create multiple wall mounts if you have several headphones. Simply assemble the bicycle hooks and mark the positions where you are going to make a drill. 
  2. Create the holes and insert the hooks there. 
  3. You are free to choose the placement of the hooks. They can be either vertical, horizontal, or slant, depending on the availability of space.

5. Homemade Headphone Hanger

A clothes hanger turned into a headphone hanger!

Image Source: YouTube

You can always convert different stuff in your home into a DIY headphone hanger. Here, we are going to use a metal clothes hanger as the hanger of our headphones. You will also need a ruler, plier, and a binding string or wire.

  1. The first thing that you need to do is to remove the portion of the hanger where the hook is present. Use the pliers for the cutting process. 
  2. Next, still use the pliers to straighten the hanger’s bottom part. 
  3. Bring the ruler and use it so that you can make patterns on the hanger. 
  4. Use the pliers again to create sharp bends in the structure. 
  5. Once done, utilize the binding string or wire as a means of reliable structural support for the hanger. By that time, you will be able to place your headphones already.

6. Under Desk Headphone Hanger DIY

A steel pipe used as an under desk headphone hanger

Image Source: CNet

You can always place the headphone hanger under your workstation’s desk. This is a space-saving solution if your table is already filled with some other stuff.

Here, you would need an iron pipe or steel as the primary material for the DIY hanger. Aside from that, you would also need a floor flange fitting, steel nipples, elbow fitting, steel cap fitting, and flat-head screws. You would need a power drill and drill bit, as well.

  1. Begin by affixing the floor flange under the desk or wall. Hold the flange there and take a marker or pencil to mark its position.
  2. Next, bring the power drill and create four pilot holes where you are going to insert the screws. 
  3. Screw a nipple to the floor flange, while the elbow fitting should be screwed on the nipple’s opposite side.
  4. Hold the floor flange to the surface and drill the screws. You can adjust the pipe if it is not straight.

Tips to Make A Headset Hanger

An organized workstation with a headphone stand on it

Image Source: iStockphoto

Making a headset hanger is a fun and worthwhile endeavor. Here are some valuable tips that you should follow whenever making one.

  • Try to look for inspiration. Sometimes, it is difficult to make a design, especially if it is your first time crafting a headset hanger. Fortunately, there are numerous design inspirations over the internet that you can replicate.
  • Mind the space. When making a headset hanger, it is essential that you have available space where you can mount the hanger. As much as possible, it should not get in the way of your workstation. 
  • If possible, don’t spend. One of the driving principles of DIY crafts is being able to create something from the raw materials in your home. You don’t have to spend on making crafts, especially if all the needed tools and materials are available.
  • Make it simple. When making a headset hanger, you don’t need to overcomplicate stuff. A basic design that serves its purpose is definitely something that you should strive to achieve.

Lamicall Headphone Hangers and Stands

Lamicall is a supplier of high-quality headphone stands for businesses, workspaces, and various office settings. We integrate corporate aesthetics and ergonomic functionalities to our headset stands and hangers, ensuring that they can match your requirements.

Moreover, we also accept customized orders if our current products don’t fit your needs. Contact us, and our customer service representatives will be there to assist you.

Meanwhile, here are some of the existing headphone holders and hangers that are present in our catalog.

Dimensions Weight Material
Lamicall Under Desk Headphone Hanger DH01 4.7 inches x 3.0 inches x 3.5 inches 2.3 ounces Plastic / Silicone
Lamicall Headphone Hook Desk DH03 6.1 inches x 3.93 inches x 1.9 inches 5.74 ounces Plastic / Silicone
Lamicall Headset Stand for Desk H1 5.1 inches x 5.1 inches x 12.48 inches 8.4 ounces Metal / Plastic

1. Lamicall Under Desk Headphone Hanger DH01

Under Desk Headphone Hanger DH01

Image Source: Lamicall

This unit is one of the most popular headphone hangers of Lamicall. It provides its users with flexibility by having a dual 360-degree rotating arm. It lets you position the arm in the most convenient way possible. Furthermore, this device is compatible with smooth surfaces. Regardless of your current setup, you can guarantee that this hanger will stick tightly.

Interestingly, the DH01 also includes a detachable silicone headset cable organizer. It prevents the wire of the headphones from becoming an eyesore. This headphone hanger is rated to support up to 500 grams of weight. This means that it can support almost all types and brands of headphones out there.

PROS CONS
  • Quick and easy installation
  • Can support almost all brands of headphones
  • Includes rubber pad protection
  • No noticeable drawbacks

2. Lamicall Headphone Hook Desk DH03

Headphone Hook Desk DH03

Image Source: Lamicall

The Lamicall Headphone Hook Desk DH03 is a brilliant, ergonomic headphone hanger. It has a sturdy design that enables it to support heavy headsets. Since it has a removable design, you are free to interchange its position whenever you need it. Specifically, you can mount its clamp to office desks, headboards, glass desks, and tables without the need for screws.

Moreover, this headset holder features a 360-degree rotating capability. You can conveniently swing it under your desk for hassle-free access to your headphone. Its clamps have soft rubber pads on them so that they won’t scratch your furniture. Even the holder itself has the same rubber pads, as well, to ensure that your precious headphones won’t get damaged.

PROS CONS
  • Wide compatibility
  • Can be installed to various surfaces
  • Doesn’t feel wobbly
  • No noticeable drawbacks

3. Lamicall Headset Stand for Desk H1

Headset Stand for Desk H1

Image Source: Lamicall

Unlike other headphone stands in the market, the Lamicall H1 features a holder with a bicycle seat. Because of this design, the device holds your headphones securely and steadily. The holder is also made from ABS plastic, preventing your headphone from sustaining any scratches. Another notable feature of this headphone stand is its wide base. It enhances its stability across any surface, even on slippery desks and tables.

PROS CONS
  • Low center of gravity for enhanced stability
  • Stand and base are made from aluminum
  • Offers a secure hold to your headphones
  • No noticeable drawbacks

Conclusion

Headphones can be stylish and expensive. They also play an important role in keeping you from being distracted by external noises. However, it is undeniable that storing these accessories can be a little bit difficult.

Fortunately, you have different options when it comes to DIY headphone hangers or stands. With the use of various materials, you are free to create the ideal headphone hanger that suits your workstation or setup.

Lamicall is a premium manufacturer of headphone stands and headset hangers. Its product offers great compatibility with different headphone brands, such as Philips, Audio Technica, BOSE, Sennheiser, and Sony. Visit Lamicall to see all your options. 

Check other informative posts in this blog!

Leave a Comment

Your email address will not be published.

Scroll to Top